Table of Content
The color temperature is a comfortable 5000k, which will fulfill all your brightness needs. They have frosted glass and are impact resistant. If you have a ballast, they will be 20 watts, and if you don’t have a ballast, they will be 18 watts. Below, there is a list of best products that I have compiled after intense research. Moving up, we have bright white and blue light that is 5000k or above. The white, common daylight, starts from 6500k.
The LED light is better than a tube light because it lasts way longer. It is known to last approximately 40,000 more hours than the tube light. A ballast is a device that is used for the regulation of electric current in the fluorescent tubes. This electrical component is only meant for the fluorescent tubes. These lights have two rows of LEDs; they keep the brightness maximum while keeping the heat minimum. You can fit these lights in almost any fixture; they are compatible with t8, t11 and t12 fixtures.
JOMITOP V Shaped LED Tube Light
Their cover is transparent, so the brightness will not be affected, unlike a frosted cover, in which the brightness is hindered. You can replace them easily with your fluorescent bulbs. LEDs are the cost-efficient replacement for fluorescent bulbs. Most of the time, you can reuse the fluorescent fixture by putting an LED into it.
Use one eight-foot bulb instead of two-four feet ones. Another good product by JOMITOP, only this time, the tube lights are eight feet. With these tube lights, you will have an energy-efficient solution for your lighting needs. They let you wire five lights in one series so that you can save up on wiring.
HYPERIKON T8 4 Foot LED Tube Light
This product offers you a total lumen count of 1120 lumens, which means brightness is ensured. You can install these lights, whether you have a ballast or not. Which means they can be installed as the primary fixture, as well as a replacement for incandescent bulbs.
Which means 11,400 lumens for the entire thing. They are highly shatterproof because of their thermoplastic cover. The installation process is very simple with this one. The lights can be installed into the tombstones directly, with no need for extra, tiresome installation procedures.
CNSUNWAY LIGHTING LED Tube Light
So, here we have compiled a list of the best-LED tube lights available in the market. Generally, LEDs are less harmful and dangerous than fluorescent bulbs. Which means you will be able to save heftily on the electricity bills. They have a large beam angle to offer, up to 270 degrees. The installation process is easy, just plug and go.
You will be able to install this tube light simply by bypassing your ballast. They are powered from a single end, and you need a ballast for them. For homes, a tube light with a lumen count of 1600 would do. But for offices, it needs to be at least 2000. We supply suitable tubes for storing and handling small samples. Microanalysis tubes have rounded bottoms and are fitted with an intermediate partition.
The color temperature they offer is 5000k, which is daylight white. The traditional incandescent bulbs cannot be repaired. However, in an LED tube light, you can replace almost anything.
For 1600 lumens, a 20-watt bulb will be enough. There you go, you have all the information necessary to upgrade to LED tube lights. This is equal to five CFLs of 23 watts, five incandescent bulbs of 100 watts, or eight LED light bulbs of 10 watts. The whole idea behind LED lights is that they save money by not needing starters and ballasts. In a 4 foot T8 fluorescent bulb, there will be 2850 lumens per bulb.
You will not need to replace your lighting over and over again once you have fitted these lights in your house. Sometimes, there are also remote controlled lights or the ones that can be connected to Bluetooth or wifi. The wattage of light determines how much electricity it will be consuming, to deliver the lumens. The more the wattage, the higher your bill will be.
They are all arranged in a row, and they run on either 110 or 220 volts. They will not flicker or buzz; instead, they only take a second to switch on. The beam angle that it’ll give you is 140 degrees. The life span is also more, saving you a lot of money.
This is because the LED ones are powered by the household wording directly. They have a wide range of applications and can be used for residential, commercial, and professional uses. The color temperature is 6000k, so it gives off a cool white color. You can link one lamp to the other, the maximum number of lamps that you can link together is 4.
You can install these tubes in five minutes only, whether you have experience or not. There are different colors offered by different LED lights, and their color is determined by their temperature. This comprehensive guide would help you choose the best-LED tube light that falls into your budget and requirements. For an average living space that is 250 square feet, you will have to use at least 5000 lumens for just the primary light. The LED lights can be used with a ballast, but it is better to remove it because it will only take up more energy.
But, if your eyes are exposed to the LED lights for a lifetime, then there is a chance of macular degeneration that is age-related. It has been approved by the UL, so it will end up providing a healthier solution that the other lighting options. The snap joints are included, so you can just insert the plug, it’ll light up. The original shunted sockets are called tombstones. After studying the basic features, you can now move on to the list of the best products available in the open market.
The power consumption and the thermal output will stay low. So you will get cheaper, brighter, and healthier lighting solutions. The number of lumens this tube has to offer is a solid 2000. They will only use 18 watts of your electricity and provide the output of a 40-watt fluorescent bulb.
